Thetford® Tecma

Thetford® Tecma

  1. Locate flush line at rear of stool.
  2. You may have to remove the four mounting bolts to slide the stool forward to access the line between the solenoid valve and barb union. [View 1]
  3. Cut the line and insert the T-valve with the flow arrow pointing away from the solenoid valve. (If the T-valve is installed backwards it will not draw chemical from the reservoir.) [View 2]
  4. Secure in place with two clamps provide with kit.
  5. Return stool to its original position with the feed line to one or the other side of the stool.
  6. Mounting the dispenser reservoir to the wall.
  7. Locate reservoir to the back or side wall, providing easy access to filling. [View 3]
  8. Keep the reservoir level or lower with the top of the stool.
  9. Screw the reservoir into place with the tree screws provide with kit.
  10. Add a few ounces of Blue Streak Chemical to the reservoir and flush stool. You should get a sky blue color in the bowl.

View 1
View 1

View 2
View 2

View-3
View 3